1. Connect the G.L.O.V.E. to the PC with a USB cable
  2. Log into the software
  3. Power on the device by pressing and holding the power button for ~ 3 seconds until the button is illuminated
  4. Navigate to the Event Log tab
  5. Click "Establish COMMS"
  6. Verify the Serial Number on the screen matches the serial number of the device you are offloading the data from

NOTE: There are two numbers on the microprocessor boxes - the correct serial number is the one that DOES NOT begin with a letter

7. Click Get Event Log

8. The logs are automatically placed in the database

9. Do NOT Erase event logs. Per the manufacturer, the gloves are meant to hold thousands of entries.